The Evacuator Escape/Evacuation Descent System Significantly Improves Survivability of Service Teams working at Heights up to ... 300 Metres! - A Fire Proof system fitted with steel cables, 30 minutes 1750 Degrees Celsius/90 minutes 1290 Degrees Celsius. - Panic Proof, instinctively simple to use, connect harnesses on preinstalled hooks, open hatch (climb over winch deck barrier) and start descent. - Escape-procedure within 10 seconds. - With a Fully automatic descent, 1 m/s. - The Steel cables, cannot burn, melt or get tangled. - Safe descent at all wind speeds. - Safe descent when nacelle is on fire. - Always there where you need it, immediately ready to use. - Pre-installed at the escape hatches, so cannot be missed. - No time consuming preparation, just click on and go. - No electrical supply required - Multiple personnel can descend at the same time, Max. load system 564Kg. (Max. load 282Kg per hook/reel). - In case of acute health problems/cardiac arrest a person can be safely on the ground within the 6 Golden minutes. - Can be done with 1 hand (in case Injury has been sustained to other hand). - Maintenance friendly, visual inspection and system-test, approx. 15Minutes per year. - Long Lifespan >30 years. - Lower costs of ownership compared with rope based rescue equipment. - Easy installation, suitable for all wind turbines, on and offshore. - Installation does not damage the nacelle-construction and does not interfere annual maintenance in the nacelle (No drilling required). - Certified by DEKRA Germany EN341, in compliance with ANSI Z359/CSA Z259. Brings Compliance: The Evacuator escape descent system brings compliance to the Official European Safety Standard for Wind Turbines EN50308, Paragraph 4.2.2: “The descent device has to be fireproof enough to allow escape from the nacelle to the ground in the event of fire, it shall be suitable for the numbers of persons to be evacuated”. Info: www.Survitecgroup.com www.TeSuCoN.nl www.Evacuator.com read more